/!\ Caution!
Conditions for measuring the oil level
1. Vehicle is level.
2. Engine is off.
3. Ignition on.
Oil return time
Before the oil level is measured, the engine oil has to have flowed back into the oil pan. The time taken for the engine oil to flow back depends on the engine temperature and how long the engine has been stopped. This waiting time is counted down in the onboard computer display when the ignition is switched on. The oil level display segments start to “cycle”.
It is best to measure the engine oil level with the engine at operating temperature. Correct measurements and short waiting times are achieved in this way.
Initiating oil level measurement
Oil level measurement during refuelling
The oil level is automatically measured during refuelling. If the oil level is too low, “Check oil level” appears in the on-board computer display. However, this measurement is performed only if the following preconditions are met:
The engine is at operating temperature, the ignition is off, and refuelling is completed within 15 minutes.
Failure
A failure of the oil level display is indicated by a warning message in the on-board computer.
| Monday | 08:30 - 17:30 |
|---|---|
| Tuesday | 08:30 - 17:30 |
| Wednesday | 08:30 - 17:30 |
| Thursday | 08:30 - 17:30 |
| Friday | 08:30 - 17:30 |
| Saturday | 08:30 - 12:30 |
| Sunday | Closed |
